Weber.tec 933 25 kg cement putty for surface sealing and facets

Product description

weber.tec 933 (Deitermann HKS) hydraulically setting, water-impermeable mortar for making facets (coves) and for making leveling layers for waterproofing coatings in insulation bath type

Product application

• for making facets (coves) at the floor / wall or wall / wall interface,
• for filling cavities in concrete or in masonry and surface leveling (leveling).

After hardening, it can be covered with other sealing materials, such as KMB polymer-bituminous masses or elastic sealing grouts.

Product highlights

• waterproof
• shrink-free
• quick-curing
• indoor and outdoor
• easy in the application
• sulphate-resistant
• can be used for leveling putty

Conditions during application and wi Ties

The temperature of the substrate and air during the works should be between + 5 ° C and + 30 ° C. Do not apply on a frozen substrate, do not work in negative temperatures or during rainfall. Further processing after: 2-3 hours.

Safety measures

The product contains cement - when mixed with water, it becomes alkaline. Taking measures to prevent dusting or splashing of the mortar. Do not inhale, protect skin and eyes from splashes. It is recommended to use personal protective equipment (glasses, gloves, aprons).
During the work, the health and safety regulations regarding health protection resulting from the relevant ordinances and the provisions of the safety data sheets and labeling on the packaging must be observed.

Translations of product names and their descriptions have been translated using Google Translate.