WEBER modeling plaster, modelino D strip, board imitation
Wróć do kategorii: Thermal insulation systemFiles to download
Possible delivery options
Any questions?
Description
Technical data
Supplier: | WEBER |
Supplier's index: | 14WTDMOD/25D05/DES |
Drying time: | ~20 min |
Number of layers: | 1 |
Layer thickness: | Min. 1,5 mm |
Color: | Beige |
Application temperature: | +5°C - +25°C |
Package: | Bucket |
Usage: | |
Weight: | 25 kg |
PRODUCT HIGHLIGHTS
- resistant to algae fouling
- in natural color raw wood
- easy shaping of the board texture
- wood grain drawing made with a special tool or with the use of stamping templates
- weber.ton azure acrylic stain finish
PRODUCT TEST VIDEO:
PRODUCT APPLICATION
- Colored finish of concrete walls and plinths
- Finishing of weber.therm thermal insulation systems intended to imitate a wooden façade
- Finishing layer in weber.therm thermal insulation systems exposed to the risk of mechanical impact
It is not recommended to use plaster: < / p>
- in thermal insulation systems based on mineral wool
- on surfaces not protected against precipitation
- on horizontal or inclined surfaces level
RECOMMENDATIONS
- Due to the very fine texture of the plaster, the substrate should be very carefully prepared.
- The plaster is recommended to be applied from the PH951 weber templates.
- The plaster is intended for manual application. The plaster is not blurred in the traditional way. The method of plaster application and finishing depends on the desired effect.
- The "rustic brick" effect is obtained by applying two colors of plaster mix (the principle of applying "wet on wet") from the same color group.
- Do not apply plaster on horizontal or sloped surfaces
- Do not work in increased conditions air humidity (high risk of patterns detachment)
- Use only weber KS125 adhesive and putty mortar for the reinforcement layer.
Translations of product names and their descriptions have been translated using Google Translate.