Mosaic plaster WEBER. Mosaic strip, 15 kg

Wróć do kategorii: Thermal insulation system

Product code: 59050

Kod EAN: 5902628330000

Files to download

Weber.pas.mosaic is designed for manual preparation of internal and external decorative plaster coatings. It can be used on all even mineral substrates such as concrete, traditional cement plasters, plasterboard and wood-based panels and reinforced layers of thermal insulation systems of buildings.

Free delivery! (in Poland)

Available colors in "Download"

Possible delivery options

Odbiór własny Szczecin

Odbiór własny Bydgoszcz

Wróć do kategorii: Thermal insulation system

Net price: $35.23 /piece

Price: $43.34 with VAT 43.34

Storage: to order

Czas realizacji

Ask for the product

Określ ilość:

quantity piece

Add to clipboard

Dobierz akcesoria

Description

Technical data

Supplier:	WEBER
Supplier's index:	14WTD355/15M10
Quantity per Pallet:	24 pcs.
Application temperature:	+5°C to +25°C
Weight:	15 kg

Product description

Weber.pas mosaic is a ready-to-use mosaic plaster based on acrylic resin and colored quartz aggregate. Meets the requirements of PN-EN 15824.

The most important product properties

high durability: resistant to mechanical damage,
low wear: up to 5 m ² from one package
easy to apply - flexible
ready to use
for manual and mechanical application
for interior and exterior
reduced water absorption
for gypsum plasters and gypsum boards & amp; Cardboard
24 attractive designs

Product Application

< p> Decorative mosaic plaster weber.pas mosaic is used for:

decoration and finishing of surfaces with particular stress on indoor and outdoor use
interior architectural details decoration

The product cannot be used on surfaces exposed to capillary water rising and constant water load, i.e. on the walls of shower cubicles, around the bathtub and on fights.

Recommendations

The mosaic plaster weber.pass mosaic is especially recommended for:

plinths of buildings, fence posts, stairway entrances, staircase finishes, corridors finishes and architectural details finishing
plasters and indoor gypsum finish coats after priming with deeply penetrating primer

Do not use on surfaces exposed to capillary water rising and constant water loads, e.g. . shower cubicle walls, bathtub area, wash basins, etc.

Do not apply without priming the substrate.

Do not apply if the temperature of the substrate and the environment during application is lower than + 5 ° C.

Layer thickness [mm]	max 1,2
Adhesion	? 3MPa
Application temperature	+ 5 & amp; degC to + 25 & amp; degC
Open time < / td>	About 20 minutes
Consumption on level ground	up to 3.5 kg / m ² < / td>

Translations of product names and their descriptions have been translated using Google Translate.