Conditions during application and setting The building must have a roof, windows and doors. The temperature of the ambient and substrate during the work and for the next 7 days should be between + 10 ° C and + 25 ° C. Relative humidity of the substrate should be less than 95%, air humidity 50-70%. During works and 3 days after their completion, it is recommended to ventilate the rooms slightly, but drafts should be avoided. Do not allow intense sunlight or heating up the poured mortar. Application of the product The self-leveling floor weber.floor 4610 Industry Top is part of the system for the implementation of new and renovation of existing industrial floors and is intended for: quick execution of even, smooth and accurately leveled floors loaded with light, medium and high transport traffic and subject to intensive abrasion use inside buildings in new and renovated buildings, on load-bearing concrete surfaces, in industrial facilities, production halls, warehouses, shops, garages, exhibition areas, public buildings, etc. Floor in a subdued, non-uniform gray color. In order to increase the resistance to dirt, the surface can be protected with appropriate impregnants, e.g. weber.floor HARDELITH and weber.floor LIT protect. The most important properties of the product self-leveling cement, high abrasion resistance resistance to high transport loads, quick-hardening pedestrian traffic after 1-3 hours, very good adhesion to the substrate, can be used as a base for paints and resin floors, vapor-permeable. Safety measures The product contains cement - when mixed with water, it gives an alkaline reaction. Take measures to prevent dusting or splashing of the mortar. Do not inhale, protect eyes and skin. In case of contamination: rinse eyes immediately with water and seek medical advice, wash skin with soap and water. Keep out of the reach of children.
Translations of product names and their descriptions have been translated using Google Translate.