Acrylic plaster WEBER.pas topflex, 1.5 mm lamb, 30 kg

Product description

Acrylic plaster weber.pas topflex is a factory-colored product, delivered in buckets, in the form of a paste, ready for use on the construction site after prior mixing. The product is based on a water dispersion of acrylic resins and mineral structural aggregates. The plaster has a coating protection against algae or fungus fouling.

The most important properties of the product

• flexible
• resistant to mechanical impact < / li>
• efficient - up to 20% less consumption
• low water absorption
• ready to use, available in 100 colors

< / h3>

Application of the product

• Colored finish of concrete walls
• Colored finish of thermal insulation systems based on polystyrene insulation, designed in intense, saturated colors
< li> For indoor and outdoor use
• For manual and machine application

Recommendations

Work Details related to the installation of the thermal insulation system are described in detail in ITB instructions No. 418/2007 and 447/2009. This description defines the general scope of application of the product, but cannot replace the professional preparation of the contractor. Works should be performed in accordance with the construction practice and health and safety rules. The manufacturer guarantees the quality of the product, but has no influence on the conditions and method of its use. In case of doubt, carry out your own tests or contact Weber's Technical Advisors. With the publication of this technical data sheet, the previous ones will expire.

Color selection

Weber decorative plasters are produced on the basis of natural marble aggregate, which may vary in size. shade depending on the deposit. Therefore, when applying decorative plaster, it should be remembered that full, indivisible wall surfaces should be plastered in full, without interruptions in work from the same production batch (the same batch number on the packaging). Plastering works should be organized in an appropriate manner, depending on the size of the plastered surface and weather conditions.

When selecting colors, it should be especially remembered that they obtain a different color in natural light and different in artificial light. . The differences also result from the different perception of color on the paper and on the facade. In addition, the color impression is influenced by: varied textures of the plaster surface, air humidity, season, surroundings, distance from the object as well as the type and nature of lighting. The final color obtained also depends to a great extent on the conditions of execution.

Translations of product names and their descriptions have been translated using Google Translate.