Water meter well DN 400

The design solution of the bottomless water meter well enables the use of geothermal properties of the earth. Frost protection results from maintaining a positive temperature inside the well, the source of which is the heat of the earth.

Insulation of the well with a special cover and insulating plug allows the installation of a 30 cm water meter under the cover and prevents freezing at a temperature of - 30 ° C. The well can be installed in areas with high groundwater levels.

Application of a water meter well

 
The wells are used in the water supply system, they are used to mount the water meter in their chamber. The well allows installation of 1/2 and 3/4 inch water meters.

Mounting method

The well is mounted on the water supply network connection. The idea of ??these wells is the ability to read water meter readings outside the property without entering a residential building etc. Suggested mounting locations are lawns or pedestrian routes.

If you intend to mount a well under a communication route, e.g. an entrance for passenger cars, please indicate in the order the option of a manhole with increased strength. A standard plastic cover in class A15 can be replaced without a surcharge for a cast iron cover by adding the letter "z" at the end of the picking symbol.