WEBER modeling plaster. Modelino C strip, imitation of architectural brick and concrete
Files to download
Possible delivery options
Any questions?
Description
THE MOST IMPORTANT PROPERTIES OF THE PRODUCT
- resistant to algae fouling
- easy texture shaping architectural concrete or bricks
- imprint of brick joints made using a special silicone template
- finish with acrylic stain weber.ton azure
PRODUCT TEST VIDEO (ARCHITECTURAL CONCRETE):
PRODUCT APPLICATION
- Colored finish on concrete walls and plinths
- Finishing of weber.therm insulation systems intended to imitate a façade made of architectural concrete or brick
- Finishing layer in thermal insulation systems plating weber.therm exposed to the risk of mechanical impact
It is not recommended to use plaster: p >
- in thermal insulation systems based on mineral wool
- on surfaces not protected against precipitation
- horizontal or sloping surfaces < br />
RECOMMENDATIONS
- Z Due to the very fine texture of the plaster, the substrate should be prepared very carefully.
- The plaster is recommended to be applied from the PH951 weber templates.
- The plaster is intended for manual application. The plaster is not blurred in the traditional way. The method of plaster application and finishing depends on the desired effect.
- The "rustic brick" effect is obtained by applying two colors of plaster mix (the principle of applying "wet on wet") from the same color group.
- Do not apply plaster on horizontal or sloped surfaces
- Do not work in increased conditions air humidity (high risk of patterns detachment)
- Use only weber KS125 adhesive and putty mortar for the reinforcement layer.
Translations of product names and their descriptions have been translated using Google Translate.
Technical data
| Supplier: | WEBER |
| Supplier's index: | 14WTDMOD/25C05/AG |
| Color: | Gray |
| Package: | Bucket |
| Usage: | |
| Weight: | 25 kg |
