The most important properties of the product. Adhesive for porcelain stoneware, flexible, thin-layer C1T up to 6 mm frost-resistant with increased flexibility compared to typical C1T adhesives for porcelain tiles with a maximum size of 40x40 cm on substrates with increased load on balconies with dimensions of up to 1.2x1.5 m can be used on plasterboards without priming. Application of the product Weberfix EASY cement glue can be used indoors and outdoors in residential construction as well as in commercial, service and commercial facilities, on floors with increased load. It is intended for laying porcelain tiles, glaze and terracotta tiles as well as non-absorbent stone, 40x40 cm in size, on walls and floors. The substrate for fixing tiles with weberfix EASY glue can be: concrete, concrete bricks and hollow bricks, ceramic bricks, silicate and aerated concrete blocks, cement-lime plasters, cement repair and leveling mortars, cement screeds and screeds, anhydrite screeds, gypsum plasterboards without priming. Weberfix EASY cement glue can be used for leveling surfaces under the tiles to be laid on walls (layer thickness up to 6 mm) and for building small elements made of generally available masonry materials, e.g. bathtub or shower tray covers, etc. Outdoor tiles should be frost-resistant . IMPORTANT! Classes of adhesives for tiles Adhesives are classified on the basis of the European standard PN EN 12004. According to it, adhesive mortars are divided by type and class. There are types of adhesives (due to their chemical composition): C - cement, D - dispersion, R - reactive (based on synthetic resins: polyurethane and epoxy). Due to technical parameters, the classes of adhesives are: 1 - normally binding, 2 - with enhanced parameters. Due to additional requirements, the classes of adhesives are: F - fast-setting, T - with reduced flow, E - with extended open time. Additionally, according to the PN EN 12002 standard, adhesive mortars can be divided according to their transverse deformation into: S1 - deformable adhesives - from 2.5 to 5 mm, S2 - highly deformable adhesives - over 5 mm. Thus, mortar marked with C2 symbol has better adhesion properties than ordinary class C1 mortars. The adhesive marked C2 S1 is additionally characterized by deformability, and C2 S2 - high deformability. The C2 TE mortar is a quick-setting cementitious adhesive with increased adhesion and reduced flow, C2 FT S1 - a quick-setting deformable cement adhesive with increased adhesion and reduced flow.
Translations of product names and their descriptions have been translated using Google Translate.