Machine plaster, cement-lime outdoor WEBER IP PLUS 25 kg Light

The most important properties of the product: - High efficiency - contains light aggregate - For indoor and outdoor use - To be applied with a plastering aggregate or by hand - Excellent application properties - Resistant to weather conditions - Low water absorption - Non-flammable Application of the product: Weber IP PLUS plaster is light, cement-based. lime base plaster for subsequent finishing layers in residential buildings as well as in commercial, industrial and public facilities. It is used for: making undercoat plasters for thin-layer plasters, plastering coats, ceramic tiles, etc. making smoothly trowelled plasters, e.g. for painting, wallpapers, etc. ceramic, ceramic bricks and silicate plastering of concrete surfaces and other smooth or low-absorbency surfaces, provided that an adhesive layer of Weber KS122 adhesive and putty mortar is used for the final finishing of surfaces inside and outside buildings, also in damp and wet rooms, e.g. . bathrooms, showers, laundries replace traditional construction mortars, prepared on the construction site from ingredients is also much lighter, faster and easier to prepare and execute. It also significantly reduces the risk of shrinkage cracks. Recommendations Dedicated for application with a plastering unit on outdoor surfaces Especially for plastering substrates made of light construction materials, e.g. LECA blocks, aerated concrete blocks, etc. Recommended as a base for finishing layers: thin-layer plasters, plastering coats, adhesive mortars, and also smooth-finished for painting and wallpapering. Do not use if there is direct sunlight, moisture, rain or drafts causing rapid drying during application and setting. Technical data: Mixing ratio: 6.0-6.5 l / 25 kg Minimum layer thickness [mm]: 10 Maximum layer thickness [mm]: 20 Compressive strength [N / mm2]: & amp; ge2.5 (CSII) Adhesion [N / mm2]: & amp; ge0.2 (FP: B) Water absorption [kg / m2 * min 0.5]: & amp; le0.2 (W2) Thermal conductivity & amp; lambda10, dry [w / mK ]: 0.45 (P50) Ready to use time (temperature approx. 20 ° C) [h]: 2 Shelf life: 12 months from the production date Consumption: 11-12 kg / m2 for a layer thickness of 10 mm

Translations of product names and their descriptions have been translated using Google Translate.