Izoplast B 22 kg insulation based on solvents

Izoplast B ' is a mixture of asphalt and additives in organic solvents. The product with the consistency of semi-liquid mass is used on & amp; ldquozimno & amp; rdquo. Thanks to the use of fillers, it has excellent penetrating properties, and the waterproofing coating is characterized by much better waterproofing properties, durability and flexibility.

APPLICATION
General, industrial, residential, road construction .
- maintenance of asphalt roofing felt on the roofs of all structures regardless of the slope,
- vertical and horizontal dampproofing of all structures,
- waterproofing of concrete substrates, foundations, building benches, concrete screeds, ceramics , clinkers, etc.,
- protection of plinths of buildings, concrete fences, etc.,
- waterproofing of pipes and sewage wells, concrete rings, pumping stations,
- damp insulation of road structures, e.g. viaducts, bridges, retaining walls, etc.,
- anti-corrosion protection of metal surfaces, e.g. in road construction - elements of railings and energy-intensive barriers, steel structures, etc.
- especially recommended for use in conditions of strong hydration and in water environments salted with sodium chlorides. Resistance to saline water (approx. 3% NaCl) confirmed by COBR Katowice tests
- recommended by the Road and Bridge Research Institute

DO NOT USE FOR TAR PAPER

Roofing felt maintenance - clean the roofing felt from moss, dust, etc. Check the technical condition of the roofing felt. Repair any damage, e.g. blisters, cavities, cracks and fill with patches (IZOPLAST K bonding).
Spread IZOPLAST B (without heating) with a roofing brush or brushes in a thin layer at least twice. Consumption with a single application approx. 0.4-0.6 L / m? depending on the technical condition and quality of the roofing felt. Consumption for subsequent coats of approx. 0.2-0.5 L / m? Vertical and horizontal waterproofing - waterproofing of concrete surfaces should be done after removing dirt and leveling the surface, it is imperative to prime with IZOPLAST R & amp; rsquo. Carry out subsequent insulation layers at intervals of approx. 8 hours. Consumption with a single coat of approx. 0.2-0.5 L / m & amp; sup2. Recommended minimum number of layers 1 x IZOPLAST R '+ 2 x IZOPLAST B & amp; rsquo. Anti-corrosion protection - should be performed after cleaning the surface of deposits of rust, old paint, grease, etc., using brushes, brushes or mechanically with a paint gun. Consumption approx. 1l / 5-8m

ADDITIONAL INFORMATION
All works with the use of IZOPLAST should be carried out at positive temperatures in rainless weather. The drying time of the coating is approx. 10 hours depending on the ambient temperature. During work, comply with the applicable health and safety regulations when working with organic solvents. In the case of particularly dangerous works: swimming pools, canals, tanks, manholes, etc., strictly apply restrictions and appropriate collective and individual protection measures for this work, for example: effective ventilation, blowing, or half-masks with an organic vapor absorber or fresh air apparatuses. In case of poisoning, provide the victim with fresh air, provide first aid, call a doctor.

CAUTION
IZOPLAST B 'cannot be used inside residential and public buildings and other rooms

Translations of product names and their descriptions have been translated using Google Translate.