Realbud.com
7619 2446

Primer WEBER.prim QUARTZ 5 kg

Wróć do kategorii: Mortars and adhesives
Producer: Weber
Product code: 2992
Kod EAN: 5900350281768
Files to download
Possible delivery options
Odbiór własny Szczecin
Odbiór własny Bydgoszcz
Wróć do kategorii: Mortars and adhesives
Net price: $29.51 /piece
Price: $36.30 with VAT 36.30
Storage: 9 piece
Czas realizacji
Yes
Określ ilość:
quantity piece
Add to clipboard  
Dobierz akcesoria
Any questions?
Ask an expert

Description

Technical data

Supplier: WEBER
Supplier's index: 14PGKWAR/05
EAN Code: 5900350268899
Drying time: 2-3 h
Application temperature: From +5°C to +25°C
Package: 5 kg
Usage: 0.1-0.15 kg/m2
Weight: 5 kg

THE MOST IMPORTANT PROPERTIES OF THE PRODUCT

  • Creates a contact layer between the existing substrate and the new mortar layer
  • After drying, the sand from the preparation creates a rough surface, improving the adhesion of new layers
  • < li> Very good adhesion to smooth and sealed surfaces
  • The yellow color of the agent makes it easy to distinguish between primed and non-primed areas
  • Alkali-resistant
  • One-component
  • Ready to use
  • Indoor and outdoor
  • Solvent-free

PRODUCT APPLICATION

Weber.prim contact is intended for:

  • priming smooth and low-absorbent surfaces, e.g. concrete, terrazzo, OSB boards, ceramic and stone tiles, etc., before laying floor mortars, adhesive mortars, plasters, etc. .
  • for indoor and outdoor use in new or renovated residential buildings and public utilities.

TECHNICAL DATA

< / table>

* At air temperature + 20 ° C and relative humidity of 65%. Higher temperature and lower humidity will shorten the time, lower temperature and higher humidity will extend the given time.

STORAGE AND TRANSPORT

Store only in original, tightly closed containers in dry rooms at temperatures above + 5 & amp; ; degC. The shelf life is 12 months from the production date specified on the packaging. Protect against frost and high temperatures.

SAFETY MEASURES

The product is a non-toxic substance and in normal conditions of use it is not hazardous. Protect your eyes and skin. Perform work in protective clothing. In the event of contamination with the preparation: rinse eyes with plenty of water and consult a doctor, wash skin with soap and water. Keep out of the reach of children.

SURFACE PREPARATION

The substrate must be dry, firm and compact. The substrate must be cleaned and vacuumed. Pay particular attention to the thorough removal of the release agents used for the formwork. Degrease surfaces greasy with oils or greases with a suitable preparation or burn them. Weak or soft substrates (e.g. bituminous) must be removed.

APPLICATION AND BINDING CONDITIONS

During priming, the ambient and substrate temperature should be + 5 ° C to + 25 ° C. Light airing during and after the application of the preparation accelerates its drying, but drafts should be avoided.

DIRECTIONS FOR WORKING

The contents of the package should be thoroughly mixed before use. Apply the priming agent on the substrate in an even, thin layer using a paint roller with a short pile or a wide brush. Avoid puddles of the primer on the substrate. The drying time of the soil depends on the air and substrate temperature and humidity. Protect the primed surface against contamination. The mortars should be placed no later than 24 hours after applying the primer. After this time is exceeded, the priming should be repeated.

Translations of product names and their descriptions have been translated using Google Translate.

Delivery zones
Warehouse in Szczecin
Warehouse in Bydgoszcz

Related products

Shop is in view mode
View full version of the site
Product compliant with: PN-C -81906: 2003 (gen. III)
Specific Gravity approx. 1.26 g / cm 3
Material consumption: depending on the substrate
approx. 0, 1 - 0.15 kg for 1 m 2
Drying time: approx. 2-3 hours
Application temperature from + 5 & amp; degC to + 25 & amp; degC