Izoplast R 20L solvent-based primer

IZOPLAST R is intended for priming concrete, cement and cement-gypsum surfaces, impregnating wooden elements (eg fence fences, roof shingles, etc.) and for making independent & amp; short 'insulating coatings. Recommended by the Road and Bridge Research Institute

HOW TO USE

Before applying the primer and light insulation coatings, the substrate should be properly prepared, i.e. remove dirt, level the surface, remove fossils, etc. In the case of making new screeds or rubbing the joints, priming should be performed after the seasoning period of min. 10 days.
- wooden, chipped, asbestos-cement surfaces: remove mineral contamination, dust, etc. replace rotten and decayed elements.
- steel structures, steel and galvanized sheets: removal of rust, old paint deposits, grease, grease, etc. Rust removal is allowed up to the 3rd cleanliness class.
- priming and insulating coatings on metal surfaces, in each case, "cold" is done, with brushes, roofing brushes or mechanically on the prepared substrate
The time of coating depends on the ambient temperature, air humidity, the condition of the substrate, the degree of plane inclination, but it should not exceed approx. 6 hours.
Priming - it is enough to even coat the entire surface once.
Consumption of IZOPLAST R 'for priming and the first insulating coat on metal surfaces is approx. 0.3 ± 0.6 L / m & amp; sup2. Consumption for subsequent coatings on metal surfaces: approx. 0.2 & amp; ndash0.4 L / m & amp; sup2.

ADDITIONAL INFORMATION
All works with IZOPLAST carry out in positive temperatures in dry weather.

During work, comply with the applicable health and safety regulations when working with organic solvents. In the case of particularly dangerous works: swimming pools, canals, tanks, manholes, etc., strictly apply restrictions and appropriate collective and individual protection measures for this work, for example: effective ventilation, blowing, or half-masks with an organic vapor absorber or fresh air apparatuses.

NOTE
IZOPLAST R 'cannot be used inside residential and public utility buildings as well as other rooms intended for permanent residence of people and the food industry. The material should not come into direct contact with food and drinking water.

Translations of product names and their descriptions have been translated using Google Translate.