Cellular concrete Suporex 18 cm SOLBET 590x180x240 var. 600 P + W, 64 pcs / fire, 7 pcs / m2

SOLBET - A MATERIAL THAT WILL MAKE YOUR HOME HEALTHY, WARM AND ENERGY SAVING. SOLBET materials are the result of over fifty years of experience in the production of aerated concrete. A consistent development policy and refined production technology enable the introduction of the highest quality material to the market. The SOLBET system includes modern materials for the construction of any building. The full range of SOLBET assortment allows you to build a dream house, multi-family building, as well as a commercial or industrial facility. A well-developed system guarantees the comfort of contractors and the safety of investors to build an energy-saving building in a short time. SOLBET SYSTEM - MANY POSSIBILITIES The SOLBET system offers many building options that can be adapted to the individual needs and preferences of Investors, Designers and Contractors. A refined and clear system allows you to build any building according to the high requirements of both the Investor and the Architect. The ergonomic elements of the SOLBET system allow you to build faster than with other technologies. The ease of cutting, profiling blocks for tongues, grooves and mounting brackets, and the possibility of bricklaying with a thin joint is a huge advantage. Unlimited possibilities of shaping buildings created by the SOLBET system are appreciated by Architects and Investors. The SOLBET system is used, among others, by for the construction of: multi-family multi-storey buildings, single-family buildings, industrial halls, commercial buildings, other buildings. In the construction of buildings, SOLBET system elements are used, among others for the construction of: load-bearing walls of basements, external load-bearing walls, internal load-bearing walls, stiffening walls, external filling walls, internal filling walls, partition walls, housings (e.g. fireplaces, bathtubs, cabinets, etc.), other structures. As part of SOLBET system solutions, we offer two solutions depending on your preferences. SOLBET Ideal system - single-layer wall construction system and SOLBET Optimal system - wall construction system with insulation. We invite you to familiarize yourself with our assortment. IN HARMONY WITH NATURE Natural raw materials used in the production of SOLBET materials guarantee that they are ecological products. Only natural mineral resources are used in the production of SOLBET cellular concrete: limestone, sand and water. Aluminum powder is used as a blowing agent, which creates millions of air pores. The material composition of the material guarantees its complete resistance to mold and fungi. An important feature of cellular concrete is the low level of natural radiation. Low energy consumption in the production of SOLBET materials also means care and concern for the natural environment. As regards energy demand in the production of other materials, the production of aerated concrete is one of the most energy-efficient (see diagram below). OPTIMUM COMPRESSIVE STRENGTH SOLBET blocks are used for the construction of load-bearing and curtain walls. The modern and technologically advanced production process allows to obtain optimal compressive strength parameters for individual density classes. As a result, the building built in the SOLBET system will be durable and solid. Listed below: Compressive strength of individual density classes in accordance with PN-EN 772-1: Density class: Average compressive strength [MPa] 400: 2.0 500: 2.5 600: 3.0 600: 4.0 700 : 4.0 EXCELLENT THERMAL INSULATION Cellular concrete is the only homogeneous material that can be used to make load-bearing elements of a building while maintaining very good thermal insulation parameters. In order to find out the secret of good thermal insulation of this material, it is necessary to look at the structure of the material. Looking at the SOLBET block, you can see that it is a material with a homogeneous porous structure. In the case of concrete of class 400, it can be safely stated that about 80% of aerated concrete is air. It is known that air is a very good heat insulator (the best insulator is vacuum), so it is the micropores and the air they contain that provide excellent thermal insulation of this material. The parameter describing the thermal insulation properties of a material is the thermal conductivity coefficient?. Value of the coefficient? in the case of aerated concrete, it depends primarily on the bulk density. Aerated concrete with a lower bulk density has a better (lower) thermal conductivity coefficient, i.e. it is a better heat insulator. For SOLBET blocks in the 400 density class, the value of this coefficient is? = 0.11 W / mK. Another parameter characterizing the partition in terms of thermal insulation is the U coefficient. The heat transfer coefficient determines the amount of the determined heat flux flowing through 1 m2 of the partition area separating the two media with the temperature difference of both media equal to 1K. The lower the value of this coefficient, the better the partition provides thermal insulation. For a single-layer wall made of SOLBET Ideal blocks with a thickness of 42 cm, we obtain a heat transfer coefficient of U = 0.25 W / m2K. HIGH FIRE RESISTANCE SOLBET Ideal and Optimal is a non-flammable material. Due to its structure, it exhibits exceptional resistance to fire and high temperatures. When exposed to fire, it maintains its load-bearing properties for a long time, shows tightness and fire insulation. Already a 12 cm thick partition wall has a fire resistance class of 2 hours, while a 18 cm thick wall ensures the highest fire resistance class - 4 hours. In fire test laboratories, test chambers are made of cellular concrete. MILLIMETER DIMENSIONAL ACCURACY As we know, the dimensional accuracy of masonry elements has a decisive influence on, among others, the building culture. Accurately made blocks allow you to build with high precision. Thanks to the use of simple system tools, building does not require any special skills. It is precise to apply the mortar and build subsequent layers. Mortar consumption is lower and easy to estimate. The SOLBET system blocks, tiles and U-fittings are made with the following dimensional tolerance: height: ± 1 mm width: ± 1.5 mm length: ± 1.5 mm Thanks to such accuracy, it is possible to build SOLBET elements with a thin joint. Before applying the thin-layer adhesive mortar, only sand any unevenness of the upper surface of the block layer. As a result, bricklaying is faster than in technologies that do not ensure such dimensional accuracy. A thin joint also means less technological moisture introduced into the building during construction. Limiting the humidity improves the parameters of the building. EASY TO WORK, NO ARCHITECTURAL LIMITATIONS SOLBET blocks or tiles can be used both for building, extending a house and for renovation of an apartment. They can be used to build a load-bearing wall, partition wall and all kinds of casings (e.g. bathtubs) of various shapes. There are no architectural restrictions for this material. It is very easy to make walls with complex shapes (e.g. a wall with a bay or a semicircular wall). The blocks can be cut manually with a handsaw or a band saw. It is easy to make installation grooves in already masonry walls, which results in faster work progress and costs. In addition, SOLBET elements have a low weight, which makes working with this system a pure pleasure and savings.

Translations of product names and their descriptions have been translated using Google Translate.