Adhesive for Suporex aerated concrete and SOLBET 0.3 M10 silicates, gray 25 kg
Wróć do kategorii: Mortars and adhesivesFiles to download
Possible delivery options
Any questions?
Description
Technical data
Supplier: | SOLBET |
Supplier's index: | SA-CB 0.3 |
EAN Code: | 5907784491275 |
Quantity per Pallet: | 48 |
Weight: | 25 kg |
APPLICATION
Thin joint mortar for silicates on gray cement 0.3 type T, acc. to of the project, it is intended for the erection of masonry walls, columns and partition walls of bricks and sand-lime blocks by the method of masonry with a thin joint. It is used inside and outside buildings, for construction elements subject to construction requirements, it is intended for reinforced and unreinforced walls.
PROPERTIES
SOLBET Adhesive Masonry Mortar For Thin Joints for silicate 0.3, it is prepared in the form of a dry mixture of hydraulic binders, selected mineral aggregates and admixtures improving technical parameters and working properties. The mortar is frost-resistant and waterproof. It prevents the formation of thermal bridges in the place of joints between masonry elements.
DATA AND TECHNICAL PARAMETERS
- Mixing ratio: approx. 6 liters of water per 25 kg of mortar p>
- Application temperature: from +5? C to +25? C
- Duration of working properties: up to 2 hours
- Joint thickness: max. 3 mm
- Correction time: up to 5 minutes
- Compressive strength: Class M10
- Weld strength:? 0.1 N / mm2
- Chloride content:? 0.02%
- Reaction to fire: Euroclass A1
- Water absorption:? 0.8 kg / (m2min0.5)
- Water vapor permeability (tabular value of the water vapor diffusion coefficient according to PN-EN 1745: 2012, table A.12): µ 15/35
- Thermal conductivity coefficient (tabular value according to PN-EN 1745: 2012, table A.12, for P50%):? 10, dry, mat & lt; 0,61 W / mK
- Gross density when dry:? 1600 kg / m3
- Durability: frost-resistant - Aggregate thickness: & lt; 0.8 mm
- Dangerous substances: see the Safety Data Sheet
- Consumption: about 4.5 kg of dry mortar per 1 m2 of 24 cm thick wall, with a thickness of 3 mm, for building masonry elements profiled for tongues and grooves, i.e. with unfilled vertical joints
STORAGE
12 months from the date of production, in tightly closed, original and undamaged packages, in dry rooms (storage on pallets recommended)
Translations of product names and their descriptions have been translated using Google Translate.